Your Cart is Empty
| Model | Q5s | Color | Titanium |
| Weight | About 195g | Dimensions | About 124mm x 64mm x 16mm |
| Audio Input | Standard 3.5mm Port (Shared Line / Coaxial/ Optical in) | Digital Coaxial Input Port | Standard 3.5mm Port (Shared Line / Coaxial/ Optical in) |
| Digital/Optical Input Port | Standard 3.5mm Port (Shared Line / Coaxial/ Optical in) | USB Port | Micro USB（11pin） Data exchanging 、 Charging、Firmware upgrade |
| Analog Input port(LO) | Standard 3.5mm stereo jack | Headphone Output Port | Standard 3.5mm stereo jack |
| Balanced Output Port | 2.5mm/4.4mm port | Recommended Headphone Impedance | 16~150Ω(PO) |
| 16~300Ω(BAL) | |||
| Channel Balance | 0.1 dB | Gain | Yes(High/Low) |
| Bass Boost | Yes | Volume Control | Potentiometer(ADC Sampling) |
| APP interconnection | Supports setting through App | Bluetooth codec indication | Yes |
| Supports connection to Sony Walkman players | Yes | Sampling rate indication | Yes |
| Deep-sleep | utomatic stand-by, can be controlled on App | Firmware upgrade | System firmware and Bluetooth version can be upgraded through USB |
| Power Supply | DC5V 2A (Recommended) | Battery Capacity | 3800 mAh |
| Charge Time | ≤3.5 h （DV5V 2A） | Battery Life | ＞25 h (AUX IN) |
| ＞9.5 h (USB IN) | |||
| ＞9.5 h (OPT IN) | |||
| ＞9.5 h (COAX IN) | |||
| ＞9.5 h (Bluetooth IN) | |||
| Charging Indicator | The side blue light flashes, blue light stays on after it's fully charged. | Low Battery Warning | Red light flashes twice every 3 seconds |
| Bluetooth | Bluetooth 5.0, supports AAC/SBC/aptX/aptX Low Latency/aptX HD/LDAC/HWA | MFi | Yes |
| Sampling Rate Supported Up to | 768kHz/32bit（USB IN） | DSD Support（USB IN） | DSD64/128/256 |
| 192KHz/24bit（COAX IN） | |||
| 96KHz/24bit（OPT IN） | |||
| Chips Used | DAC: AK4493EQ * 2 , USB: XMOS XU208 , Bluetooth： CSR8675 , LPF：OPA1642×2，Volume IC：NJW1195 OP+AMP：AD8620+OPA926 | ||
| Line output specifications | |||
| THD+N | ＜0.001% (1 kHz/10kΩ) | SNR | ≥115 dB (A-weighted) |
| Frequency Response | 5 Hz~90 kHz（-3dB） | Channel Separation | ＞97 dB (1 kHz) |
| Line level | 1.8 Vrms | ||
| AM3E Headphone out specifications (3.5mm headphone out jack) | |||
| Output Power 1 | ≥280 mW（16Ω / THD+N＜1%) | Output Impedance | ＜1.2Ω (32Ω loaded) |
| Output Power 2 | ≥210 mW（32Ω /THD+N＜1%) | Channel Separation | ≥75 dB (1 kHz，AUX IN) |
| Output Power 3 | ≥30 mW（300Ω / THD+N＜1%) | THD+N | ＜0.002% (1 kHz） |
| Frequency Response | 5 Hz~50 kHz（-3dB） | Peak Output Voltage | ＞6 Vp-p |
| SNR | ≥117 dB (A-weighted) | Max. Output Current | 150mA (For reference) |
| Max. Input Level | 3.8 Vrms | ||
| Balanced headphone out specifications (2.5mm/4.4mm TRRS headphone out jack) | |||
| Output Power 1 | ≥535 mW（16Ω / THD+N＜1%) | Output Impedance | ＜2Ω (32Ω loaded) |
| Output Power 2 | ≥560 mW（32Ω /THD+N＜1%) | Channel Separation | ≥105 dB (1 kHz，AUX IN) |
| Output Power 3 | ≥112 mW（300Ω / THD+N＜1%) | THD+N | ＜0.002% (1 kHz) |
| Frequency Response | 5 Hz~50kHz（-3dB） | Peak Output Voltage | ＞10.5 Vp-p |
| SNR | ≥115 dB (A-weighted） | Max. Output Current | 150 mA (For reference) |
|
|
|
|
|
|---|---|---|---|
Dual AKM AK4490EN DAC chipsThe Q5 is equipped with two of AKM’s AK4490EN DAC chips - known for its smooth, pleasant yet detailed sound due to its high signal-to-noise ratio and low distortion. Audio up to 384kHz/32 bit sampling rates and bit-depths are supported as well as native DSD up to DSD256. |
XMOS USB AudioWe elected to use the XMOS XUF208 microcontroller for its stability, powerful functionality, and its proven reliability. You can be sure that the Q5 will just work when connected to most audio sources, such as computers or mobile phones. |
Certified by 3 Major BodiesHi-Res Audio Certified MFi Certified aptX Certified |
USB DAC functionalityIn USB DAC mode the Q5 supports PCM audio up to 384kHz/32 bit and DSD up to DSD 256 (no drivers required for Mac). |
|
|
|
|
|
|---|---|---|---|
Multiple usagesYour iPhone never sounded so good before Supports connection to Sony Walkman players Partners well with your computer Perfect companion to players and amplifiers One-stop shop for all of your coaxial/optical/line input needs |
Interchangeable amp modulesThe Q5 continues to use the innovative interchangeable amp module design used by other models in FiiO’s lineup and is fully compatible with any FiiO amp modules released thus far. The Q5 is bundled with the AM3A amp module with both single-ended and balanced outputs. |
ADC volume controlThe Q5’s volume control is based on an ingenious ADC mechanism, which aims to rid of problems such as volume imbalance between the left and right channels and extra noise while increasing overall adjustment accuracy when changing the volume by accurately reconstructing the ADC curve. |
World-class Bluetooth audioThe Q5 is a high-performance Bluetooth enabled DAC/amplifier combo that bypasses its Bluetooth chip’s internal DAC for much better sound quality. |
|
|
|
|
|
|---|---|---|---|
Unique RGB status lightsWith the Q5, you can quickly identify what input is being used by simply taking a glance at the RGB lights near the bottom of the device. White: USB input Green: Line input Purple: Optical input Yellow: Coaxial input Blue: Bluetooth input Red: Battery status |
Gain switches and bass boostWith the Q5, you can switch between low and high gains (depending on how much driving power your headphone needs) as well as toggle between bass boost on or off (depending on your preferences). |
3800 mAh batteryThe Q5’s high capacity battery is designed so that it will last as long as you need it to. Connect to mobile phones: last for about 10 hours Connect through its coaxial input: last for about 10.5 hours. Use purely as an amp: last for about 20 hours. |
A wealth of accessoriesThe Q5 comes with so many accessories including: short Lightning-to-micro USB cables, long Micro USB cable, 3.5mm cable, 2x long straps, 2x short straps, coaxial adaptor, optical adaptor, screwdriver, non-slip mat, and carrying pouch. |
