Headphones
  • Source
  • Microphones
  • Speakers & Hifi
  • Sold out

    Burson Audio Soloist 3X Grand Tourer Headphone Amplifier & Pre-Amp

    AN EPIC GRAND TOURER


    THE BURSON SOLOIST 3X GT IS THE EMBODIMENT OF OUR INNOVATIVE SPIRIT. IT IS THE FIRST HEADPHONE AMP IN THE WORLD THAT WORKS SO HARD IT NEEDS ACTIVE COOLING. THROUGH RESEARCH AND OVER-ENGINEERING, WE TURN UNCONVENTIONAL APPROACHES INTO DESIGN BENCHMARKS, AND WE THANK ALL THE LIKE-MINDED AUDIOPHILES WHO APPRECIATE OUR APPROACH AND WITNESS OUR PROGRESS.

    SYMMETRICAL THROUGH AND THROUGH



    YOU CAN’T JUDGE A BOOK BY ITS COVER, BUT YOU CAN JUDGE CIRCUITRY BY ITS LAYOUT. SYMMETRICAL DUAL-MONO IS BEAUTIFUL AND ACHIEVES THE HIGHEST POSSIBLE AUDIO PERFORMANCE. UNDER THE BONNET, THE GT HAS TWO INDEPENDENTLY POWERED MONO AMPS IN MIRRORED SYMMETRY. THE RESULTING PITCH-BLACK SOUNDSTAGE AND CRISP DETAILS ARE BREATHTAKING!


    Powering the GT


    The thumping heart of the Soloist GT is 5 sets of Burson Max Current Power Supplies. We are pushing these MCPS to the limits of their potential. So much so that they consume 90W when idle and need active cooling. Although spitting out 10 Watts, the GT is not tracing power. Instead, it pursuits purity. So if you ever wonder what Norah Jones really sounds like, this dream machine takes you there!

    Symmetrical Audio Paths


    The V6 Vivid discrete opamps are wildly regarded as the best globally and used in countless recording studios. The GT uses three V6 Vivid opamps per channel, achieving incredible transparency. However, it still plays to your preference by allowing opamps to change, enabling you to create your own listening experience.

    ELITIST VOLUME CONTROL X 2

    The typical stereo volume control creates lots of cross channel interference. Industry aristocrats such as Pass Lab and AVM use the MUSES72320 volume control to reduce such distortion in their flagships preamps.


    The Soloist GT goes further by using one MUSES72320 + V6 Vivid discrete buffer volume control per channel, eliminating any chances of cross channel interference.



    HEADPHONE CROSSFEED

    Live music and loudspeaker sound arrive at your head mixed. It gives you a sense of positioning. Most recording engineers also work under the assumption that their tracks will be playing through stereo speakers, not headphones.


    Some headphone listeners use software to create that crossfeed, but such DSP often create other distortions.


    The Soloist GT has three levels of hardware-based crossfeed emulation. So you can listen to your favourite track, exactly the way you like it!


    GT COOL.

    Our Burson Cool Case is already the most oversized heat sink on any headphone amp. Still, we adopted active cooling for the GT.


    With every component operating in a predetermined temperature range, independent of the environment, active cooling gives us the freedom to push the GT to its performance limit.


    To eliminate wind noise, we designed a new enclosure to enhance stiffness and reduce resonance. Combining this resonance-free enclosure with the quietest fan money can buy from Noctua in Austria, wind noise sits below 25dBA. In comparison, an empty recording studio has over 30dBA of ambient noise. So, the GT is quieter than the background ambience of your music.


    Measurement Package Content
    Input impedance: 35 KOhms Soloist 3X Grand Tourer (R-120X)
    Frequency response: ± 1 dB 0 – 48Khz Remote Control
    THD: <0.0015% 24V/5A Power Unit
    Output impedance (Headphone Amp): 0.5 Ohm Power Cable
    Output impedance (Pre Out ): 25 Ohm XLR to RCA adaptor X 2
    General
    Inputs: 2 x XLR2 x RCA1 x Mic Bypass Weight: app. 5 kg
    Outputs: 1 x XLR Preamp1 x RCA Preamp1 x RCA Subwoofer Output1 x XLR Headphone Jack1 X SE Headphone Jack Dimensions: 255mm x 270mm x 70mm
    Impedance (Headphone Jack) Power XLR / SE Signal to Noise Ratio Separation
    16 Ohm 10 / 5W 112db 99%
    32 Ohm 8 / 4W 110db 99%
    100 Ohm 3.8 / 1.9W 111db 99%
    150 Ohm 1.3W / 650mW 110db 99%
    300 Ohm 640 / 320mW 109db 99.50%